Telemetry and Data Acquisition Products
The SAKI™ line of data acquisition products are designed to meet various application needs, including acoustic sensor networks, sonar systems, and surveillance systems. Capabilities range from 10 to 24 bits and 200kHz to 2GHz sampling rates.
SAKI™ Telemetry Products
SAKI™-NIC and SAKI™-MTG
ATM based network interface controller for towed array and small form factor products. The MTG is an ATM based master timing generator for SAKI™-NIC arrays. This device is programmable and generates time sync’d clocks for array applications.
SAKI™-EO
For ATM over SONET applications at OC-3 speeds the EO node is a media converter for copper to fiber optic. Long haul, and single fiber options available.
SAKI™-GigE
Gigabit Ethernet telemetry and interface controller for high data bandwidth embedded applications. Shock, vibration, and EMI tested. Suitable for rugged, demanding data acquisition solutions. Suitable for sonar and radar applications.
Data Acquisition Products
SAKI™-ADC and SAKI™-DAC
PSI offers a variety of analog to digital converters and digital to analog converters including 24-bit and 16-bit nodes. Nodes are passively clocked, highly configurable, and use an SPI interface to communicate with a telemetry systems.
SAKI™-RF
Extremely high speed ADC and DAC converters for radar applications and software defined radio applications. These nodes are clocked at speeds of 1.6GHz and have onboard configurable data processing to enable demanding data applications.
SAKI™-IQ
Based on the SAKI™-16b-2AD node, this node has a digital IQ demodulator on the front end and has firmware for FSK demodulation. Enabling technology for ruggeded radio receivers.
SAKI™-12C
The SAKI™-12C card is intended for driving and controlling LEDs and other digital input/output applications.
SAKI™-Chassis
Extruded, hard-anodized, aluminum chassis with wedgeloks that form a conductive heat path to the outer pressure vessel or container. Can be fabricated in custom lengths.
SAKI™-DCDC
Intended for SAKI™-Chassis and SAKI™-GigE Applications. Available in several power ratings 30W and 60W, with various input ranges.
SAKI™-CIPOWER
Constant Current Power Supply. Generally customized to your requirements, but the base design provides a high efficiency constant current power supply, with significant on board diagnostic functionality.
SAKI™-MIDPLANE
The MIDPLANE is a passive interconnect card engineered to support the high speed differential signaling used the in the SAKI™ network components. Several common configurations available, including midplanes and backplanes.
Other PSI DAQ Products
PMC-Digital-IQ
PMC daughter card form factor digital radio card. Input ADC sample rate is 85.6Msps and output DAC rate is the same with a 14-bit resolution. Intended for very accurate IQ phase and magnitude measurements. Phase error averages less than 10 mille-degrees. Includes 25 pin digital IO connector.
Legacy Telemetry and High Speed Bus Products
FPDP-to-TAXI Card
VME chassis cards for dense applications. This line of cards come with up to 64 analog channels. Also included in this category are signal conditioning cards in the same form factor.
SCB
16-channel signal conditioning card. Variable gain steps, filter poles, and output signal levels.
SAKI™-AtA and SAKI™-AtE
VME chassis cards for dense applications. This line of cards come with up to 64 analog channels. Also included in this category are signal conditioning cards in the same form factor.
Contact
Tom Shaver
tshaver@plansys.com
(228) 863-0007 x121